Water Treatment Chemicals for Fishing & Marine in Namibia

Measured, documented and verified: dosing to hold a stated free-chlorine residual at points of use, daily DPD test records, and SDS plus dosing procedures on file. Whether hypo through a dosing pump or SDIC through a feeder, the inspector reads your logbook before your plumbing — we supply the chemistry, the test reagents and the template both.

Usually yes: hardness, air and organics in feed water freeze visible. Softening or sequestering the feed (hexametaphosphate), carbon filtration where taste and odour intrude, and clean chlorination upstream produce the clear, neutral ice fish buyers read as freshness. An ice plant is a water plant wearing a different hat — treat the feed accordingly.

Soften or sequester the feed, control alkalinity, and blow down on schedule — coastal supplies carry hardness plus chlorides that punish neglect with scaled tubes and pitting. A monthly hardness-and-pH check on feed and blowdown (PC5 tester and reagents from our lab range) catches drift before the fuel bill announces it.

Ferric chloride is the fish-industry workhorse — it handles fatty, protein-rich streams and wide pH swings — with polyelectrolyte flocculating the fines and dramatically shrinking sludge volume. Dose rates come from jar tests on your actual effluent, which we will run with you; fish effluent varies too much between plants for book values.